Keri Systems Doors16 - Manual (Page 161)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 161
Perform the following steps to set the search expression to search only for Access Denied or
Door Forced Open events.
1. Click on the CLEAR button.
2. Click on the Left Paren button.
3. Set the Field Type to Event(TYPE).
4. Set the Operation to =.
5. Set the Field Value to Access Denied.
6. Click on the ADD button.
7. Set the Link field to OR.
8. Set the Field Type to Event(TYPE).
9. Set the Operation to =.
10. Set the Field Value to Door Forced Open.
11. Click on the Right Paren.
12. Click on the ADD button.
Figure 150 displays the search expression to this point.
Figure 150 – Limiting the Search to Access Denied or Door Forced Open Events
Perform the following steps to add the Front Door and Back Door only requirement.
1. Set the Link field to AND.
2. Click on the Left Paren button.
3. Set the Field Type to Door(DOOR).
4. Set the Operation to =.
5. Set the Field Value to Default Site, Front Door.
6. Click on the ADD button.
7. Set the Link field to OR.
8. Set the Field Type to Door(DOOR).
9. Set the Operation to =.
10. Set the Field Value to Default Site, Back Door.
11. Click on the Right Paren button.
12. Click on the ADD button.
Figure 151 displays the search expression to this point.