Keri Systems Doors16 - Manual (Page 185)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 185
Figure 174 – Default Site Information, Part 2
3. Once all information is entered, click on the button. If these changes are not
saved before clicking any other button or exiting the system setup window, the data
entered is lost and must be re-entered.
4. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).
Adding a New Site
Perform the following to add a new site to the spreadsheet.
1. Click on the site button. A new row appears on the Sites spreadsheet.
Enter the site configuration information for the new site as per the instructions in the Enter
Site Configuration Information section above. For example, a new site has been added for a
Warehouse site and the configuration information has been entered. The resulting site
spreadsheet information is displayed in Figures 175 and 176.