Keri Systems Doors16 - Manual (Page 84)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 84 Revision 2.1
Figure 59 – Save the Edited Access Group
6. Click on the button. If the edited access group is not saved before clicking any
other button or exiting the setup access group window, the data entered is lost and must
be re-entered.
7. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).
Delete an Access Group
This section describes the process for deleting an access group. For this example, an access
group named Emergency Access will be deleted.
1. To delete an access group, click on the Setup
⇒
Access Groups pull-down menu or click
on the tool bar button. The Create and Edit Access Groups window appears (see
Figure 60).
Figure 60 – Access Group - Entry Window