Keri Systems Doors16 - Manual (Page 13)

Keri Systems, Inc Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 13
2. Press the letter C. The following screen will appear.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
Enter 1 = COM1, 2 = COM2, 3 = COM3, 4 = COM4
3. Press the number corresponding to the COM port the host computer is using for
communication with the access control network (in this example, 2 was pressed).The
following screen will appear.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
4. Press the letter T. The following screen will appear.
KERI SYSTEMS INC. COMM TEST UTILITY
Plug in the Keri Loopback Test plug before starting the test.
Type C to set COM port
Type T to test COM port
Use icon in upper left to quit the program
PORT: COM2
STATUS: Untested
Testing, please wait . . .