Keri Systems Doors16 - Manual (Page 45)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 45
Get Controller Status
The get controller status command allows an operator to verify that all controllers/doors are
recognized and to verify that the configuration information reported by the controller is
correct.
Get Status For All Controllers
1. Click on the Setup
⇒
System pull-down menu or click on the button on the tool
bar.
2. Click on the Controller Status tab. The Controller Status window appears (see Figure
20).
Figure 20 – Controller Status Window
3. Click on the button. All controllers are polled for their configuration and status,
and this information is entered into the Controller Status spreadsheet (see Figure 21).