Keri Systems Doors16 - Manual (Page 130)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 130 Revision 2.1
Figure 109 – Save to File, After Changes
11. Click on the button. If the save to file change is not saved before clicking any
other button or exiting the setup monitor window, the data entered is lost and must be re-
entered.
12. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).
Controller Reports Events
The controller reports events fields allow an operator to determine which events should be
reported by the controller. Many events are normal day to day activities that an operator may
not want to have take up controller processing time or event buffer space. The default is for
all controller generated events to be stored and reported in the controller’s event buffer.
In this example, the message text strings (notifying when the controllers process the enabling/
disabling of Daylight Savings time) will be disabled so they will not be stored and reported in
the controller’s event buffer.
1. To access the message text strings to not be stored and reported in the controller’s event
buffer, click on the Setup
⇒
Monitor and Events pull-down menu.
2. Click on the Messages tab. The Messages window appears (see Figure 110).