Keri Systems Doors16 - Manual (Page 44)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 44 Revision 2.1
Figure 17 – Collecting Default Parameters to Update the Network
NOTE: Click on the Cancel button at any time to stop the update process.
2. Once all parameters are collected, the host computer connects to the access control
network (if it isn’t already connected). The Net Communication window appears as the
connection is made (see Figure 18).
Figure 18 – Connecting to the Network
3. Once the connection is made a series of windows similar to Figure 19 appears indicating
data is being transferred from the host computer to the access control network.
NOTE: Once the update process has begun, please be patient. The update process can take
anywhere from several seconds to several minutes depending upon the amount of information
to be updated and the number of controllers receiving information.
Figure 19 – Updating the Network
4. When these windows disappear, the access control network has received all default
operating parameters and is ready for basic operation.