Keri Systems Doors16 - Manual (Page 181)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 181
Figure 170 – System Configuration, After Changing to Multiple Sites
5. Click on the button. If the change to multiple sites is not saved before clicking
any other button or exiting the system setup window, the software conversion to sites is
not complete.
6. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found earlier in this users guide).
Enter Site Configuration Information
The Sites tab has now been added to the Setup System window. The Sites tab allows an
operator to configure the communication parameters and provide identification information
for the individual sites.
The following operations are performed in this section.
• assign a site name
• enter the site address
• enter the site PIN
• enter the site’s modem phone number
• enter the modem’s initialization string
• enter a global secure time
• enable the global unlock feature for a site
• enter a comment regarding a site
To enter the Sites tab:
1. Click on the Setup
⇒
System pull-down menu or click on the button on the tool
bar. The following window will appear, including a new tab: Sites.
2. Click on the Sites tab. The Sites window appears (see Figure 171).