Keri Systems Doors16 - Manual (Page 38)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 38 Revision 2.1
Figure 7 – Setup System Window
4. Click on the System Configuration tab. The System Configuration window appears (see
Figure 8).
Figure 8 – System Configuration Window
5. Use the pointing device and click on the COM port radio button (1, 2, 3, or 4)
corresponding to the COM port that will be used for communication between the host
computer and the access control network.
Set the Communication Speed
6. Verify the communication speed is set at 9600. If it is not, click on the 9600 radio button.