Keri Systems Doors16 - Manual (Page 132)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 132 Revision 2.1
Figure 112 – Controller Reports Event, After Changes
11. Click on the button. If the controller reports event change is not saved before
clicking any other button or exiting the setup monitor window, the data entered is lost and
must be re-entered.
12. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).