ETC Congo Family v6.4.0 - Manual (Page 975)

973
RESUME
Resumes the current crossfade. This is sent automatically when PAUSE is pressed after
PAUSE and MSC is active.
Resume (Main Playback):
F0 7F 01 02 01 03 F7
SET
The SET command allows setting Congo's faders to specific levels. An MSC SET command
packet looks like this:
Where defines the Controller number and defines the level. These are
both 14-bit values, a combination of two 7-bit values. Both in and the
first value is the LSB and the second value is the MSB. For fader values Congo
uses the most significant 8-bits of the 14-bit value for the level, giving a resolution of 256
steps.
Some examples of how percent value convert to values in Congo:
Percent Level Value
0% 00 00
10% 00 0D
20% 7F 19
30% 7F 26
40% 00 33
50% 00 40
60% 7F 4C
70% 7F 59
80% 00 66
90% 00 73
100% 7F 7F