ETC Congo Family v6.4.0 - Manual (Page 391)

389
• Sequences can be played back from the Main playback, or any Master Playback.
• You can create up to 999 sequences.
• You can link any Master Playback to a sequence step.
• You can trigger a Sequence with MIDI and Time Code.
• You can play back any Sequence in Chase (looped) mode with BPM and rate.
• A new play begins with Sequence 1 already loaded into the Main Playback, ready for
creation by simply recording presets.
Record a Sequence Live (6.1)
Record a sequence in the Main Playback:
1. Enter a number
2. Use the level wheel to set an intensity level
3. Press RECORD - you will get a popup suggesting the next free preset number
4. Press RECORD again - you have now recorded a preset, and it has been added as
the first (or next) sequence step in the main playback
5. Repeat this procedure three times - you will have a sequence with three steps
Play back this sequence on the Main Playback:
1. Enter 0 and press GOTO - lights in A fade to zero
2. Press GO to fade through the sequence - the fade time is default set to 5 seconds
NOTE
The Main Playback and the Master Playbacks share intensities using
HTP (Highest Takes Precedence) logic. Channels with intensities
coming from Master Playbacks may not appear to fade in the Main
Playback if the levels from the masters are the same or higher than
those in the Main Playback.