ETC Congo Family v6.4.0 - Manual (Page 807)

805
Masters - Attribute parameters (6.1)
You can load and activate attribute parameters from master playbacks. This is very useful for
parameters that map well to faders, like iris, focus, shutters and color mixing. They are
displayed with a "Pm" before the number in the master displays.
Once an attribute parameter is loaded to a master, and depending on the nature of the
parameter, you can
• Use the master fader as the "parameter wheel"
• Use the master key as the "parameter wheel key"
• Hold the Master key and use the level wheel to change the value relatively (6.1)
The result is applied to the selected channel(s).
Load a parameter to a master (6.0)
To load a parameter to master select a device with that parameter, hold the parameter wheel
key and press a master key.