ETC Congo Family v6.4.0 - Manual (Page 873)

871
Console Key - PAUSE (in Master Playback)
The PAUSE key is used to pause an ongoing crossfade in the Master Playback.
• [PAUSE] - Pauses the ongoing crossfade in the connected master playback.
For more information see Master Playback - Playback Keys .
There is no keyboard equivalent
Console Key - PALETTE (Alt P)
The PALETTE key is used for recording and recalling All Palettes, containing information
from all parameters in a device.
• [RECORD] & [PALETTE] - Record the next free palette for the currently selected
devices.
• [#] [RECORD] & [PALETTE] - Record a new palette for the currently selected
devices.
• [#] [PALETTE] - Recall a recorded palette for the currently selected devices.
• [MODIFY] & [PALETTE] - Open the All palette list.
• Hold [PALETTE] - When PALETTE is held, all existing palettes 1-40 can be
accessed from the direct select keys.
For more information see Devices - Palettes , Record An All Palette , Device Palettes - Direct
Mode.
Keyboard equivalent: [ALT] & [P]
Console Key - PARAMETER
The PARAMETER key in the big Congo console is used to set the trackball to Parameter
mode, controlling pan & tilt.
• [PARAMETER] - Set the trackball to parameter mode. Trackball will be blue.
For more information see Facepanel - Trackball .
There is no keyboard equivalent