ETC Congo Family v6.4.0 - Manual (Page 773)

771
Masters - Commands
You can select masters and set levels pretty similar to how channels, effects and groups can
be selected. The MASTER key is used for this.
Select masters and set levels
It is possible to select masters and set levels with the MASTER key PROVIDING a Master
View is open and selected.
Keyboard shortcut = F8.
Function Keys Feedback
Open the Master view [MASTER] The Master View is
opened.
Select a Master [#] [MASTER] Master # is selected and
highlighted in the Master
View.
Add [#] [+] Master # is added to the
selection.
Add a range [#] [THRU] Up to Master # are
added to the selection.
Subtract [#] [-] Master # is subtracted.
Set a level [#] [@LEVEL] The levels are set to #.
Set a level [Wheel] The levels are set to #.
Deselect all [0] [MASTER] All are deselected.