ETC Congo Family v6.4.0 - Manual (Page 291)

289
• Net3 I/O Node Closure - You can specify the closure input (1-24) and if you want to
trigger on close of open state. Note: Closure input are using the analog inputs of the
physical node but has only two states, on and off.
• Net3 I/O Node Analog - You can specify an analog input (1-24), a trigger value and
the direction.
• Local Closure - You can define triggers and actions for the external trig inputs in the
same way as for Net3 I/O node closures.
If a trigger is defined for an input, the default action (Go, Pause, Go Back and Master
40) won’t be carried out. See
Connectors
Group Numbers
Using Group numbers, you can set up a system where Congo listens to several different I/O
nodes (or local ports) and reacts with different actions. Group 0 applies to local serial and
MIDI ports, Group 1-x applies to network ports and has to match the group configured in the
node.