ETC Congo Family v6.4.0 - Manual (Page 296)

294
Patch by Channel/Dimmer
The Output Editor gives access to the following actions.
• View Outputs in different formats (All, patched, unpatched, selected)
• Select by Output or by Channel.
• Patch by Channel/Dimmer.
• Expand information to show Device Parameter names
• Levels are shown in 8 bits (0-255).
• Changing Levels are shown with a blue background for going up, and green for
down.
• Patch ranges or single channels/outputs directly.
• Park status is showed as a dimmed Output symbol.
• Next and Last can be used to step around within a selection of channels or outputs.
• Move around by holding CH/ID and using arrows or wheel.
See Patch - Introduction
The Output Editor is opened from the Browser or with keys:
• BROWSER >Patching >Patch by Channel/Dimmer
• Hold MODIFY and press OUTPUT
• Enter an output # and press OUTPUT
Output Editor - Formats
You can toggle between these formats by pressing FORMAT. The currently selected format
is indicated in the top right corner.
• All outputs
• Patched
• Un-patched
• Selected