ETC Congo Family v6.4.0 - Manual (Page 427)

425
Chase - BPM & Tap Tempo
You can set the tempo/speed to a chaser in BPM. This can be set numerically in the
Sequences tab (Browser >Main Show Data >Sequences) or using the Tap Tempo function.
Set BPM Numerically
Action Keys Feedback
1. Open the Sequences
list [SEQ] The Sequences List is
opened.
2. Step to the BPM cell
for a chase Arrow Keys The cell is highlighted.
3. Enter a new BPM [#] [MODIFY] The BPM # is assigned
to this Chase. *
*The BPM parameter is only used for sequences in Chase mode. When the BPM parameter
is set, it will override all programmed times. The In and Out times will be 0 s and the Wait
time will be set according to the BPM parameter.
Set BPM using Tap Tempo
Action Keys Feedback
1. Assign the chaser to a
Master [#] [SEQ] &
[Master_Key] The Chase is assigned
to the Master Playback.
2. Tap the Tempo [TAP] &
[Master_Key] Hold TAP and tap the
Master Key at least
twice.*
*You have to tap at least 2 times in a row before the new tempo is activated. The tapping
speed is translated to, and stored as the BPM parameter in the Sequence List. You can
easily change it afterwards.