ETC Congo Family v6.4.0 - Manual (Page 790)

788
Masters - Effects (6.0)
You can load and play back effects from master playbacks. They are displayed with a "E"
before the number in the master displays.
Once an effect is loaded to a master you can
• Use the master fader to set the level
• Use the flash key to flash the group (if it has levels)
• Use the master key to select the effect
An effect contains effect attributes. These will always be dependent upon the last played
back settings for that Effect Playback, or manual control.
The Effect Playback on the Master does not contain any recorded settings at all but If the
effect is stored to a preset that is assigned to a master, the effect attributes can be set to
• Follow the fader up
• Follow the fader down (rubberband)
• Have a defined return status (previous, main pb, preset #)
• Not follow the fader at all
• Be activated on flash
See Master settings for effects .
Load an effect to a master (6.0)
These functions are used to load effects to masters.
Function Keys Feedback
Load an effect [#] [EFFECT] &
[Master_Key] Effect # is loaded. The
number and name are
shown in the master
display
Load several effects [CH] &
[Master_Keys] This loads the selected
effects into Masters one-
by-one at current
intensities.