beautypg.com

ETC Congo Family v6.4.0 User Manual

Page 211

background image

209

Gateway

o

If DHCP is disabled, you set the Congo gateway IP address here. This is a

static gateway IP address and will remain set until changed by a user.
If DHCP is enabled, this field will display the gateway IP address that is
being used by the console (whether it is served via DHCP or a self-
generated link-local IP address).

Network Configuration Applications (6.0)

This is where you can configure your Net3 Gateways and ETC Networks. To be able to
configure nodes from the console NCE and/or GCE have to be installed.
Download the latest GCE from the ETC website, put it on a USB stick in the same folder as
Congo installers and install it in the same way as you update the Congo software.

Please check the corresponding manuals for these products.