ETC Congo Family v6.4.0 - Manual (Page 1001)

999
/parameter/pantilt
/parameter/huesaturation
Independents
/independents/fader/X <0.0-1.0> X= 1-6
/independents/key/X <0.0-1.0> X = 7-9
Direct Selects
/directselects/page/X, X = 1-5
/directselects/key/X, X = 1-40
Transmit:
Congo will send bank labels and direct select labels when they change:
/directselects/page/label/x
/directselects/label/x
Action Macro
/actionmacro
Executes the Action Macro in
For example:
/actionmacro GO PB
If you are sending from Max, make sure that the whole command is sent as one string
parameter, using “” around it when necessary.
Transmit - OSC Output (6.3)
OSC output can be transmitted from an Action Macro, or from a template. In addition,
sequence texts and master levels are transmitted to remote devices - see
Receive - OSC
Input .
To transmit OSC commands you have to activate transmittion of OSC and select a port
(default 8000) and IP address(es) of the devices to send to in
Play Settings - Show Control .
Action Macro OSC
The parameter names need to have this format:
OSC /oscaddress %x min max.
oscaddress is the address used on OSC, like /masters/fader/1
x is either “i" to send as an integer parameter or “f” to send as a float parameter
See Congo Action Macros .
Template OSC
It is possible to define any parameter in a template to send optional OSC data. In the
Template editor, there is now a new column called OSC. It will open a dialog where OSC
parameters can be defined. Scaling through Max value is supported.