ETC Congo Family v6.4.0 - Manual (Page 846)

844
Console Key - BANK
The BANK key is used to change bank of data in the Direct Select key sections.
Hold [BANK] - When this key is held, you can use the direct select keys to select a bank (1-
10, 11-20 etc) for each section of direct select keys.
For more information see Direct Select - Content .
There is no keyboard equivalent.
Console Key - BEAM
This key is used to record and recall Beam palettes for moving devices.
• [RECORD] & [BEAM] - Record the next free palette for the currently selected
devices.
• [#] [RECORD] & [BEAM] - Record a new palette for the currently selected devices.
• [#] [BEAM] - Recall a recorded palette for the currently selected devices.
• [MODIFY] & [BEAM] - Open the Beam palette list.
• Hold [BEAM] - When BEAM is held, all existing palettes 1-40 can be accessed from
the direct select keys.
For more information see Devices - Palettes , Record A Beam Palette , Device Palettes -
Direct Mode .
Keyboard equivalent: [ALT] & [B]
Console Key - BLIND
The BLIND key is used to edit and load content to the blind editing field. You can edit and
record channels in BLIND independently from all other fields.
• [BLIND] - Open the Blind view, and set channel control to this field.
• [LIVE] & [BLIND] - Move the values of the current channels over 0% into BLIND.
• [BLIND] & [A] or a [master key] - Move the values of the currently selected channels
from BLIND to that field.
• [BLIND] & [level wheel] - Fade the content of BLIND into the output of the console.
For more information see Blind - Blind Tab .
Keyboard equivalent: [F3]