ETC Congo Family v6.4.0 - Manual (Page 848)

846
Console Key - CAPTURE
This key is used to activate Capture mode, in which any channel that is manually altered will
be Captured, and cannot be controlled from any other function until it is released from
Capture mode. Captured channels are indicated with a red background in the channel views.
When you record a captured channel, the captured levels are stored.
• [CAPTURE] [CAPTURE] - Activate and deactivate Capture mode.
• [#] [CAPTURE] & [CH] - Capture that channel without activating Capture mode.
• [CAPTURE] & [ATTRIB] - Capture all attributes for the selected channel(s).
• [CAPTURE] & [parameter key] - Capture that attribute for the selected channel(s).
For more information see Channels - Capture Mode .
Keyboard equivalent: [C]
Console Key - CH/ID
The CH key is used to select channels, and in combination with other keys for additional
channel functions.
• [#] [CH] - Select that channel (if you are operating in At Mode, this key is not used in
the same way).
• [C/ALT] & [CH] - Clear levels and channel selection in the selected channel view.
• [CH] & [up/down arrow] - Scroll in the selected channel view.
• [CH] & [@LEVEL] - Toggle the levels of the selected channel(s) 100-0% for
identifying.
• [#] [CH] & [TIME] - Record a channel time for the selected channel(s).
• [#] [CH] & [DELAY] - Record a channel Delay for the selected channel(s).
• [ON/FETCH]&[CH] - Revert (undo) level changes back to value at initial selection.
For more information see Select Channels .
Keyboard equivalent: [-]
Console Key - CHANNEL SET
The CHANNEL SET soft key in the EFFECTS soft key menu, is used to open the Channel
Set editor for effects.
• [CHANNEL SET] - Opens the Channel Set editor.
For more information see Channel Sets
There is no keyboard equivalent