ETC Congo Family v6.4.0 - Manual (Page 404)

402
This is how the time is indicated in the live channel view, under the level.
NOTE
When Channel Times are activated, the first four Channel Times are
shown on the Main Display over the 4 wheels. The status for each
Channel Time is displayed over each wheel. Rate for each channel
can be adjusted with the corresponding wheel and the Channel Time
can be started/stopped with the corresponding wheel key.
Sequence - Channel Time Editor
Channel Times are edited in the Channel Time Editor (press MODIFY in the ChTime column
of the Sequence List). See
Sequence List .
This is where you can add a text to each channel time group. This text is shown in the
graphical time line view of the Playback list.
Editing Channels in a Channel Time Group
1. Select the Group in the Channel Time Editor
2. Add or remove Channels.
3. Press UPDATE to store.