ETC Congo Family v6.4.0 - Manual (Page 349)

347
Record a Group (6.1)
Record a Group:
1. Select channels (setting levels is optional)
2. Hold RECORD and press GROUP - you will get a popup suggesting the next free
group number
3. Press MODIFY- you have now recorded a group
Use this Group to select channels:
1. Enter 0 and press CH - no channels are selected
2. Enter the number of the group you just recorded and press GROUP - these channels
should now be selected
NOTE: If you are operating in the At Mode syntax you select a group by pressing GROUP
followed by the group number.
Assign this Group to a master:
1. Enter the number of the Group
2. Hold GROUP and press a master key. This group is now assigned to this master. If
the group has intensities stored they will apply when the master is raised. To select
the channels in this group, press the master key.