ETC Congo Family v6.4.0 - Manual (Page 566)

564
Device Control - Align
The Align key copies parameters from one Device to others.
Action Key Feedback
1. Select the device you
want to copy from Channel select
functions The selected channel is
highlighted
2. Add the channels of
all devices you want to
copy to Channel select
functions The selected channels
are highlighted
Hold ALIGN and then press the key corresponding to the parameter or parameter group you
want to copy
Function Key Feedback
Align FOCUS [ALIGN] & [FOCUS] All Focus parameters are
copied*
Align COLOR [ALIGN] & [COLOR] All Color parameters are
copied*
Align BEAM [ALIGN] & [BEAM] All Beam parameters are
copied*
Align single parameters [ALIGN] &
[Wheel_Key] The parameter assigned
to the wheel is copied.
*If Palettes are used, the palettes will be aligned, not the values.
NOTE
If you are using NEXT/LAST the currently focused channel is the one
you will copy from - to the rest.