ETC Congo Family v6.4.0 - Manual (Page 670)

668
Chase Step Editor - Functions
The Chase can only be edited from the Chase Editor and the Chase Step Editor. This
ensures that a Chase will always play back in the way it is defined. Timing information on a
step level overrides timing information on the Chase Editor top level.
Column Action Feedback
Step Shows the number of each steps.
Step time [#] [MODIFY] Sets a Step time.
In [#] [MODIFY] Sets an In time for all steps*
Dwell [#] [MODIFY] Sets a Dwell time for all steps*
Out [#] [MODIFY] Sets a Out time for all steps*
High [#] [MODIFY] Sets the High level for this step,
which is applied to all channels
when the step is active.
Low [#] [MODIFY] Sets the Low level for this step,
which is applied to all channels
when the step is active.
Channels Displays the channels in this step.
*Times set from the Chase Editor top level are edited per step here.