ETC Congo Family v6.4.0 - Manual (Page 305)

303
Patch Device(s)
Select a template from the list, or open the Import Template Wizard. See Import Template
Wizard . Importing a template will add it to the list in this dropdown.
Enter the number of devices, desk channel, DMX address and universe. When the device
type and number of devices are specified the required block of outputs is indicated in italic
over the DMX Address (see image). The first free DMX address and output offset is
suggested too.
If you check Replace existing dimmers (default), they will be unpatched automatically. If you
are patching scrollers, you can select a scroller roll. You can assign a scroller roll later as
well, from the device settings list.
Output Offset allows you to set an offset from the first attribute of each moving device to
achieve a specific numbering for the start addresses.
NOTE
Patched devices are automatically set to default values.
See
Home Positioning .
NOTE
As soon as a moving device is patched, the channel symbol in the
channel views will get an extra field for moving device information.