ETC Congo Family v6.4.0 - Manual (Page 563)

561
Device Control - Home Positioning
Home positioning of a device means setting all parameters (or part of them) to the default
values defined in the template of this device. See
Devices - Templates .
Normally it means setting pan and tilt to 50%, color to white and all other parameters to
neutral.
These functions apply to the currently selected channel(s)
Action Key Feedback
All attributes [HOME_ATTRIB]
[HOME_ATTRIB] All parameters are set to
home
Focus [HOME_ATTRIB] &
[FOCUS] Focus parameters are
set to home
Color [HOME_ATTRIB] &
[COLOR] Color parameters are set
to home
Beam [HOME_ATTRIB] &
[BEAM] Beam parameters are
set to home
Single parameters [HOME_ATTRIB] &
[Wheel_Key] Parameter # is set to
home
Another way of doing the same thing
Action Key Feedback
Focus [0] [FOCUS] Focus parameters are
set to home
Color [0] [COLOR] Color parameters are set
to home
Beam [0] [BEAM] Beam parameters are
set to home
All attributes [C/ALT] &
[ATTRIBUTES] All parameters are set to
home