ETC Congo Family v6.4.0 - Manual (Page 957)

955
Remote Control - TT Radio Remote
The TT Radio Remote control from Transtechnik is an old remote to which Congo is
backwards compatible using the serial COM port. The COM port needs to be set up to listen
to this remote. See
System Settings - COM .
TT Radio Remote Functions
Functions with white text are pressed directly
Functions with yellow text - hold the red SHIFT key down while pressing
NOTE
The Radio Remote ignores the transmitter ID and receives data from
any transmitter. There are some functions screened on the Remote
that do not apply to this console, since the same Remote is used for
a whole range of products.
Function Key Feedback
Record current light [#] [REC] Preset stored.
Load a preset [#] [PRS] Preset is loaded to A
GOTO a preset [#] [GOTO] Preset is faded in A
GO [GO] Next crossfade is started
Select channels [#] [@_LEVEL] Channels are selected *
Add channels [#] [CH]
[#] [+]
[#] [THRU] Channels are selected
Fetch levels [#] [FTCH] Levels for the selected
channels are fetched
from Preset #