ETC Congo Family v6.4.0 - Manual (Page 135)

133
Output Mode Switch
Output Mode is a three-position switch in the top right corner of the console facepanel.
Action Feedback
B.O. A Black Out of all intensity outputs, except
those controlled by the Independents in
Exclusive mode. A red B.O. Indication will
appear on the top of all screens.
ON The mode for normal operation of the console
Freeze The current output to stage is frozen. A
blue FREEZE Indication will appear on the top
of all screens.See
Freeze Mode .
NOTE that a freeze on a paused playback will
reset that playback on restore.
NOTE
If you set the Output mode switch to Freeze before you start the
application, the output will not be updated until you move the switch
to on. This makes it possible to start without output and prepare the
correct light before activating it on stage.