ETC Congo Family v6.4.0 - Manual (Page 567)

565
Device Control - Fan
FAN is used to distribute values of a parameter evenly around a centre point. There are four
different shapes of fan:
Linear
S = S shaped
V = V shaped
U = U shaped
Function Key Feedback
1. Select channels Channel Select
functions Selected channels are
highlighted in the
Channel View
2. Select base channel* [NEXT] The focused channel is
highlighted in red
3. Fan parameter # [FAN] & [Wheel] Parameter # is fanned
according to the shape in
the Settings, around the
channel focused by
NEXT/LAST.
*If no base channel is selected, the centre channel of the selection is used.
Fan Settings
Hold SETUP and press FAN to open the Fan Settings
Select with arrow keys, and press MODIFY to confirm.