ETC Congo Family v6.4.0 - Manual (Page 378)

376
Channel Editor Wizard - Type Of Change 6.1
You can perform the following actions through any range of Presets.
The parameter "Include All Channels" will affect channels with no level (0%) as well, and is
necessary in some cases.
Function Explanation
Set Level Set level #
Add Absolute Adds # points to the current channel(s) intensity
level - adding with a value of 5, 50% becomes
55%, 80% becomes 85%.
Subtract Absolute Subtract # points from the current channel(s)
intensity level.
Add percent Adds a % of the current channel(s) intensity
level - adding with a value of 10, 50% becomes
55%, 80% becomes 88%.
Subtract percent Subtracts a % from the current channel(s)
intensity level.
Swap channels Change levels between the selected channel
and the channel # in Argument.
Copy from channel Copy all levels from channel value # to the
selected channel(s). (6.1)
Set min level Sets a minimum level HTP with the current
levels.
Set max level Sets a maximum level to the current levels.
Channel Editor Wizard - Value
Depending on the type of change - the number here is the Value used. It can be a level or a
channel number.