ETC Congo Family v6.4.0 - Manual (Page 769)

767
Master fader settings (6.1)
The fader settings define the behaviour of intensities and attributes for the fader. The
different modes apply to specific content types - which is described closer in the sections of
these contents.
Mode Applies to Feedback
Fader type Ch, group, preset,
effect Add = Intensities are piled (HTP)
on top of the output. Attributes
are LTP.
Solo = The content of this fader
replaces all other master faders,
but does not affect levels coming
from the Main Playback.
Fader intensity
(6.1) Ch, group, preset,
effect, chase,
Sequence Disabled = intensity is not
affected by moving the fader
Follow manual fader =
Intensities will follow the fader
Follow master time = follows
master times
Fader Attributes
(6.1) Preset, effect, palette Disabled = attributes are not
affected by moving the fader
Follow manual fader = Attributes
will follow the fader
Execute at #% = attributes are
executed when the fader passes
#%.
Fader: Use time Ch, group, preset,
effect, palette chase,
Sequence The fader will never fade faster
than the in time
Return to (FCB) Preset, effect Defines what attributes will
return to at fade down.
None
Previous = last LTP values
Preset = a specified preset
Main Pb = sequence step in A
Preset Preset, effect Return to preset (see above)
Active parameter
lock Preset, effect Attributes cannot be stolen by
another master or the Main
Playback. Manual control is still
possible.
NOTE