ETC Congo Family v6.4.0 - Manual (Page 364)

362
Record Presets - Live Tab
When the channel control is set to the Live Tab, you will record the complete stage output.
The Preset is automatically added to the sequence in the Main Playback.
Action Key Feedback
1. Activate the Live tab [LIVE] The Channel Controls are mapped
to the A field.
1a. Record the complete
stage output to a new
Preset with the next free
number [RECORD] You will get a popup with the next
free preset suggested. You can
write a text label. The Preset is
added to the sequence in the Main
Playback.*
1b. Record a new Preset
with a specific number [#]
[RECORD] You will get a popup where you
also can write a text label. The
Preset is added to the sequence in
the Main Playback
*This depends on the BUILD SEQ mode (softkey in the Playback soft key page of the Main
Display).
Record Presets - Field A Only
There are a lot of options for recording presets. some are set in the Record Settings (hold
SETUP and press RECORD). This is a summary of the rest.
Action Key Feedback
Record
new [RECORD] &
[A] No output from the Master Playbacks will be
recorded. The Preset is added to the sequence
in the Main Playback. See
The Recording
Popup .
Record
new # [#]
[RECORD] &
[A] No output from the Master Playbacks will be
recorded. See
The Recording Popup .The Preset
is added to the sequence in the Main Playback.