ETC Congo Kid Setup Guide - Manual

Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Pieve Torina, 48, 001569 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas) [email protected] (UK) [email protected] (DE) [email protected] (Asia) [email protected]
Web: www.etcconnect.com Copyright © 2011 ETC. All Rights Reserved. Product information and specifications subject to change.
ETC intends this document to be provided in its entirety. Page 1 4340M2200 RevB 2014-04
Setup Guide
Make sure to keep the fan and vents clear of any obstructions.
USB ports are used to
connect a keyboard,
mouse, and/or USB
flash drives. One addi-
tional port is located on
Congo Kid’s face panel.
The phone remote jack is for
plugging in a cordless phone
for remote control of Congo
Kid. Please see the Cobalt
Family User Manual for more
information.
5 pin XLR DMX Cables plug into the
DMX ports to connect Congo Kid with
dimmers, scrollers, moving lights, and
other devices.
For information about MIDI and Remote Trigger,
please see the current Cobalt Family User Manual.
Cat 5 Ethernet Cable
plugs into the Ethernet
port for connecting
Congo Kid to a lighting
network or RFR.
IEC Power Cable
(1 ships with Congo
Kid) plugs into the
IEC Receptacle.
Hard Power Switch
(I is on, O if off)
Soft Power / Reset
Switch
DVI-I Port
Audio Out
(Audio In
Reserved
for Future
Implementation)
2 USB Ports
Remote Trigger
Phone Remote
DVI-D Port
Ethernet
1 & 2 2 USB Ports
2 DMX Ports
2 MIDI Ports
(One In and
One Out)
IEC Receptacle
Fan
Vents
Display
Port 2 USB Ports
eSATA
Port
®
Display Port
Display Port
DVI-I Port
DVI-D Port
DVI VGA
Yes No
Yes
with Adapter
Yes
Yes
No No
Yes
with Adapter
Yes
with Active
Adapter
Congo Kid supports up to 2 monitors using the following
combinations:
Multitouch monitors need to be Windows 7 or 8 Compatible.
Physical
Port
Signal
Type