ETC Congo Family v6.4.0 - Manual (Page 787)

785
Masters - Groups (6.0)
You can load and play back groups from master playbacks. They are displayed with a "Gr"
before the number in the master displays.
Once a group is loaded to a master you can
• Use the master fader to set the level
• Use the flash key to flash the group (if it has levels)
• Use the master key to select the channels in the group
NOTE
If a change is made to a Preset or Group that is loaded to a Master
which is active - the change will be pending until the Master is
brought to zero and back up. Pending content indicated with inverted
colors on the master LCD.
Load a group to a master (6.0)
These functions are used to load groups to masters.
Function Keys Feedback
Load a group [#] [GROUP] &
[Master_Key] Group # is loaded. The
number and name are
shown in the master
display
Load several groups [#] [GROUP] &
[Master_Keys] Hold Group and keep
pressing Master keys to
load the next stored
Groups
Master settings for groups (6.0)
These are the settings you can change for masters with group content.
Hold SETUP and press the Master key to open the settings.