ETC Congo Family v6.4.0 User Manual

Page 286

284

Congo Action Macros (6.2)

These are the available Congo Action Macros. Some have changed from over the
years. Please note that existing Action Macros using the changed commands will not be
converted automatically. They have to be manually updated to work as expected.

Remember the RULES.

Function

Command

Information

Master START

START Mx
<,target> <,time>

Moves Master x to 'target'
percent in 'time' seconds

Master GO

Go Mx <,preset> <,time> Mx,preset,time. If Preset is 0

or omitted, a simple GO
command is made,
otherwise a GOTO (preset)
is executed. If Time is set, it
will replace sequence timing.

Playback GO

Go PB <,preset> <,time> As per Go Mx but in the

Main Playback.

Master PAUSE

Pause Mx

Pause fade on master.

Playback PAUSE Pause PB

Pause fade on playback.

Run Macro #

Macro x

Executes macro x

Change Page #

Page x<,y>

Selects page x on bank y
(1=lower bank 1-20),
(2=upper bank 21-40).

Relay Status

Relay Groupx
,Relayx,ON/OFF

Sets the status of relay 1-24,
in relay group #. Group 0 is
local to the console.

UDP String
(6.2)

UDP

Sends an UDP string to the
port and IP defined in
System Settings.

Examples

Go M3,100 (Master 3 GOTO Preset 100 in default time)

Go PB,1 (Goto Step 1 in the sequence of the Main Playback)

Relay 1 ,2 ,ON (Set relay 2 in group 1 to ON)