ETC Congo Family v6.4.0 - Manual (Page 775)

773
Mask in masters (6.1)
Every master has a mask that you can define per parameter. The mask will inhibit the
playback of those parameters from that master. The same content on a different unmasked
master will play back all of its content. You can use playback masks to reuse content for
different purposes, or to keep parameters from playing back, without having to edit those
parameters out of the content.
The mask is either set up from the Master List in the Mask column, or by copying the global
Mask to a master by holding MASK and pressing the Master key.
You can also assign any user mask from the Mask list by entering # holding MASK and
pressing the Master Key. See
Device Control - Mask.
The mask is indicated in the display, the Masters tab and Masters dock.
Masters - Clear
These are the general functions you use to clear content and fader levels in master
playbacks.
Function Keys Feedback
Clear [C] & [Master_Key] The content of the
Master Playback is
cleared.
Clear all [C] & [PAGE] The Master Playbacks
are cleared.
Set all to zero [C] & [MASTER]
OR
[C] & [LIVE]
[LIVE] All Master Playbacks are
set to zero, no content is
cleared.
Clear settings [C] & [Master_key]
[Master_key] Master conent is cleared
AND settings are reset to
default.