ETC Congo Family v6.4.0 - Manual (Page 637)

635
2. Use arrow keys to select the Scroller Roll Cell for a channel.
3. Press MODIFY to get a dropdown with all defined Rolls.
4. Select a roll with arrow keys.
5. Press MODIFY to confirm.
The currently selected color will be shown in the black box under the level in the Channel
Views.
Calibrate Individual Scroller Rolls
Each scroller roll can be calibrated individually. This is done in the Scroller Calibration Editor
that is opened from the Device Settings.
1. Open the Device Settings (Browser >Patching >Device Settings).
2. Use arrow keys to select the Calibration Editor cell to the far right.
3. Press MODIFY to open the Calibration Editor for the selected channel.
4. Select Adjusted Position, enter a new value (confirm with MODIFY). It is updated live.
5. Press ESC to exit. Changes are stored automatically.