ETC Congo Family v6.4.0 - Manual (Page 366)

364
Record Directly To A Master
You can record the selected channels, or all channels with an intensity on stage directly to a
Master. A preset will be created automatically if none is specified. If Attribute recording is set
to Automatic, attributes will also be recorded. The time is default set to 100%. See
Presets -
Times .
Action Key Feedback
Record selected [RECORD]
& Master Key You will get a popup with
the next free preset
suggested**.
Record selected as... [#] [RECORD]
& Master Key You get the message
"Preset Recorded" in the
status bar.
*If no channels are selected - all channels in A are recorded.
**To separate the number series of Presets in Masters and in the Main Playback the
suggested Preset number (if no number is entered) will be starting at Preset 801. After this
the last used number when recording to this Master will be incremented.
NOTE
For a Master with a Sequence or Chase, a new preset is recorded to
that Sequence or Chase.
For a Preset - all attributes are recorded, except those Masked by the
Global Mask. For a Sequence step attributes are recorded in the
same way as the sequence of the Main Playback.
Record Selected Channels To Any Preset
Record the selected channels, with attributes and dynamics, to a specified Preset. All
moving device attributes for the selected channels will be recorded (not only changed
attributes).
Setting Key Feedback
Record selected [CH] & [RECORD] You will get a popup
where you confirm
recording this Preset,
and can write a text
label.
Record selected to... [#] [CH] &
[RECORD] You will get a popup
where you confirm
recording this Preset,
and can write a text
label.