ETC Congo Family v6.4.0 - Manual (Page 84)

82
Reset The System
When you open a new (empty) Play, you can choose to set the patch 1:1. This chapter is a
checklist for resetting the frontpanel and checking the output.
This chapter contains the following sections
•
Reset The Console Facepanel
•
Check The Output
Before you start, make sure you have loaded a new (empty) Play. See Load a New (empty)
Play
Reset The Console Facepanel
To get light you have to make sure the console is reset properly.
There is an Output Mode switch in the top right corner of the console.
Action Console Feedback
1. Enable output Output Mode Switch
to ON