ETC Congo Family v6.4.0 - Manual (Page 920)

918
Shortcuts - Dynamics (old)
These Dynamics functions can be used to start/stop and control older Dynamic Effects.
Many of them are soft keys in the Dynamics Soft Key Page. See
Dynamics - Control .
Start and stop Dynamics
DESCRIPTION SYNTAX
Activate an Dynamic Template for the selected
channels [#] [DYN_EFFECT]
Open the Live Dynamics List [DYN_EFFECT]
Select the DYNAMICS Soft Key Page in
the Main Display (softkey) [DYNAMICS]
Activate the Dynamic Template or Dynamic
Table list. [DISPLAY_LIST] &
[DYN_EFFECT]
Select all channels with a running dynamic
(softkey) [SELECT_ALL]
Select all channels with a running dynamic [CH] & [DYN_EFFECT]
Clear running dynamics for the selected
channels (softkey) [CLEAR_SELECTED]
Clear running dynamics for the selected
channels [C/ALT] & [DYN_EFFECT]
Load a Dynamic Template to a master [#] [DYN_EFFECT] &
[Master_key]
Delete the selected Dynamic from the Live
Dynamic Effect Display List (softkey) [DELETE_DYNAM]
Delete all running Dynamics (softkey) [DELETE_ALL]
Delete all running Dynamics (softkey) [ALL] & [DELETE_DYNAM]
Activate Direct Select for Dynamics (hold key
for 2secs to get display) [DYN_EFFECT]
Open the Dynamic Effect List [MODIFY] &
[DYN_EFFECT]