ETC Congo Family v6.4.0 - Manual (Page 103)

101
Facepanel - Programming Section
NOTE
Congo & Congo JR share the exact same layout of the Programming
Section. The only difference is that in Congo Jr, the number input
and channel info displays are only shown on the screen status bars.
The keys in the programming section allow you to select and store channels, levels, moving
light parameters and times.
General Facts
• To the right of the numeric keypad there is a row with keys for selecting groups of
channels, and to the right of that is a row with keys for setting levels in different
ways.
• There are keys for setting times to the sequence in the Main Playback.
• There are keys for recording and updating the current preset.
• There are direct keys to open editors for play data (SEQ, PRESET, GROUP etc)
• The Navigation pad includes the round navigating keys, the arrow keys, the level
wheel and ESC and MODIFY. See Navigating In Congo
There are two small displays
These two displays are only available physically in the big Congo. In all systems you find
them replicated at the bottom of the screens.
• Number Input (left) shows the last entered number input from the numerical keypad.
• Channel Info (right) shows the number and level of the last selected channel.