ETC Congo Family v6.4.0 - Manual (Page 934)

932
Remote Control - RFR Radio Remote
The RFR Radio Remote provides bi-directional remote control with a
hardware designed for stage environment. All of the RFR functions
are the same for iRFR.
The RFR works within its own field and this field can be cleared from the console. All
channel intensity levels generated by the remote can only be recorded into targets from the
remote control itself.
Connecting the RFR
It's possible to connect the RFR in the following ways to a Congo.
• Directly with USB
• To a base station connected with USB
• To a base station connected with Net3, which requires ACN protocol to be turned on.
Hold the decimal point when starting the RFR to get a choice of connection methods.
Group and frequency can be changed if necessary or if you have multiple units. The HF
(frequency) and Network ID (group) are changed in the remote from the remote menu, and in
the base station from the system settings. See
System Settings - RFR.