ETC Element Full Keycap Upgrade Kit Setup Guide - Manual

Key Cap Replacement Setup Guide
Page 1
Instructions
• To remove existing caps, gently place the key cap puller
around the key cap and pull straight up.
• To remove double wide caps, such as [Stop/Back] and
[Go], insert the puller on only one side, toward the left
edge of the cap. Pull up gently until that side has pulled
loose. Move the puller to the right edge and pull up gently
to remove.
• When removing caps from locations surrounded completely
by the facepanel, first insert one side of the key cap puller.
Then gently move the other side of the puller into place
and pull straight up to remove.
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Pieve Torina, 48, 00156 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas) [email protected] (UK) [email protected] (DE) [email protected] (Asia) [email protected]
Web: www.etcconnect.com Copyright © 2013 ETC. All Rights Reserved. Product information and specifications subject to change.
4330M2300 Rev C Released 2013-12
™