ETC Congo Family v6.4.0 - Manual (Page 324)

322
Template Editor - Columns & Functions
Press INSERT to insert a new Parameter. These are the functions in the columns.
Function Key Feedback
Parameter [MODIFY] Opens a dropdown. Select
parameter.
DMX [#] [MODIFY] Set DMX offset (1-256).
Type [MODIFY] Set HTP (intensity) or LTP 8/16bits.
Default [MODIFY] The default value that is used when
patched, and by HOME ATTRIB.
Highlight [MODIFY] The value used in Highlight mode.
Snap [MODIFY] Set Snap or Fade.
Invert [MODIFY] Invert the values of a parameter.
Ranges [MODIFY] Opens the Range Editor for
subranges such as gobo positions.
Tables [MODIFY] Opens the Table Editor for table
functions.
Low DMX [#] [MODIFY] Set the low resolution DMX offset for
16 bit parameters
Fine Step [MODIFY] See 16 Bit Control - Fine Step
Fade with int [MODIFY] The parameter will follow the
intensity of this Device.