ETC Congo Family v6.4.0 - Manual (Page 419)

417
Sequence - Build Sequence Mode
This mode is set in the Crossfade Settings. See System Settings - Crossfade .
The default setting for this mode is ON. When ON every Preset recorded in the Live or A tab
will automatically be added to the Sequence in the Main Playback (in numerical order). The
only reason to set this mode to OFF is when a Preset recorded in Live or A should NOT be
added to the sequence in the Main Playback.
NOTE
You can record a Preset without adding it to the Sequence in the
Main Playback with a shortcut; # RECORD & PRESET
See Record Preset - Do not add to Sequence
Sequence - Modify Sequence Mode
This function is accessed by a softkey in the Misc Soft Key Page. See Navigating - Misc Soft
Key Page .
The default setting for this mode is OFF. When turned ON all crossfade in Sequences will
disregard Wait and Followon Times, Master Links, Master Pages, Links and other linked
information. It is a mode created for rehearsals where only the main lighting changes are
advanced manually.
When activated there will be a popup explaining what this means for the user;