ETC Congo Family v6.4.0 - Manual (Page 276)

274
Designer Summary
The designer summary provides playback information at a glance that is intended to be
useful for the lighting designer.
There are three formats that can be toggled with the FORMAT key:
• Selected (channels)
• Main playback
• Main playback & selected (channels)
Selected
The Selected view shows
• Active palettes
• Channel database texts
• Dimmers address, curves and device address (single channels only)
• The previous level
• The current level
• A command line view of the last key presses
Main Playback
The Main Playback format will show
• Palette information for A or B depending on what is selected in the Crossfade
Settings, see Play Settings - Crossfade . The Palette section only shows palette info
for palettes that have been executed by the main playback, as part of the sequence.
The box to the left indicates with Red background in the playback info block that a
crossfade is running.
• The number of Devices in the next fade
• The total duration of the step in A or B, plus In/Out/Delay times for intensity and
Focus, Color, Beam.
• Timecode in and the next timecode step.
• Recording mode for moving devices
• If times are set to A or B