ETC Congo Family v6.4.0 - Manual (Page 460)

458
Channels - Ch Only Mode
The idea of a Channels Only Mode allows a complete novice to get some lights on stage.
The Fader Mode switch converts all 40 Playback faders to channel faders temporarily,
actually turning the console into a single scene board.
See Master Playbacks - Fader Mode Switch
Action Console Feedback
1. Make sure the Grand
Master is up Grand Master Otherwise there is no
light output
2. Make sure the
FREEZE switch is set to
ON Freeze Switch Otherwise there is static,
or no light output
3. Turn Fader Mode
switch to "Channels
Only" Mode Switch Channels 1-40 can be
accessed from the
Master faders now.
Move fader 1 and you
can see the value for
channel 1 on the channel
views.
You can select a channel
range from the Direct
Select keys. Direct Select keys The channels in each
range are indicated in
the displays.
The levels will remain when you exit Channel Only mode and can be used in the normal
mode.
To exit Channels Only Mode move the switch back to Masters.